You can find information on necessary checks and maintenance of your water heater in the product manual which you should receive from your installer.

The warranties between our water heater models can differ so please check the relevant product page for more information.

To benefit from your manufacturers warranty, the appliance has to be registered with us. You can do so by visiting the following website, https://www.aristonconnections.co.uk/product-registration/, or call our Customer Service team.

The standard warranty on electric water heaters ensures that you will not bear any costs or expenses if a defect occurs within 6 months from the date of the purchase.

You can find more information on the best product for your needs here:

https://www.ariston.com/en-uk/the-comfort-way/tips-and-tricks/which-electric-water-heater-is-right-for-you/

Condensing boilers are state-of-the-art products designed to obtain very high yields and offer great energy savings, thanks to the recovery of the latent heat generated by combustion. Technologically advanced, they offer great ease of use, lower consumption and lower harmful emissions. In traditional gas heating systems, almost all of the latent heat generated during the production of exhaust fumes is channeled and dispersed through a chimney outside the home. Together with the heat, harmful substances, such as nitrogen oxide and carbon monoxide, are also dispersed into the environment. In the condensing models, however, this heat is recovered and used to preheat the system return water. This function allows to obtain a considerable increase in thermal efficiency, a reduction in the power required by the boiler, costs reduced by 40% and, very importantly, a reduction in harmful emissions. The choice of a condensing boiler is, therefore, the best solution for a more sustainable future and to have domestic hot water, that for the kitchen and that necessary to always heat the radiators at the right temperature.

Your installer needs to register your boiler with us via our website https://www.aristonconnections.co.uk/product-registration/ after installation.

You can find information on necessary checks and maintenance of your boiler in the product manual which you should receive from your installer.

The boiler is a generator that uses the combustion of methane to generate heat to be transferred to the water. Its maximum efficiency can be 100%, that is when it is able to exploit all the energy contained in the gas. The heat pump, on the other hand, uses a thermodynamic cycle to transmit heat from a colder environment to a warmer one. The thermodynamic cycle is powered by a compressor, which absorbs electrical energy. Obviously the energy it absorbs is very small compared to the free one taken from the external environment. For this reason, heat pumps have performances that reach up to 190% (depending on the product).